Axago Ade-x1 Driver Download
Click Here >>> https://cinurl.com/2t7Vjp
This adapter works, but it (probably) requires a bit of work. The driver for the chipset (Asix AX88178) included with the Raspbian kernel (v 3.1.9+ Aug 7 2012) does not work. With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it. :-( In order to make it work you need to download the latest driver from the chipset manufacturer. The version I used was "Linux kernel 3.x/2.6.x Driver" v4.4.0, released 2012-05-18. Fortunately this is GNU GPLv2 -licenced source code and not a binary blob, so compiling it for the Raspberry Pi is perfectly doable. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version. >:-( Fortunately there is a very useful guide for how to get the sources from github, and preparing that source so that you can compile modules. Unfortunately you will have to compile the kernel (even if you don't actually install it) - which will take the better part of the day on the Raspberry, but once that's done you can unpack the driver source and just run "make && sudo make install". Reboot and you should have a fully working Ethernet adapter. 2b1af7f3a8